{"content_id":"zp1t76wjvj","slug":"kitchen-faucet-mounting-and-replacement-compatibility","locale":"en","schema_type":"Article","category":"knowledge_base","category_name":"Knowledge Base","title":"Kitchen Faucet Replacement Compatibility by Mount Type","summary":"Whether a faucet can be replaced depends on its mounting type, dimensions and connection specifications. This covers the distinction between replacing the faucet body and replacing parts, and what to check in manufacturer drawings and parts lists.","sponsorship_disclosure":null,"affiliate_disclosure":null,"commerce_disclosure":null,"author":{"name":"OnBinder Editorial Team","url":"https://onbinder.com/ko/about"},"key_points":["For wall-mounted faucets, check the center-to-center pipe spacing. For deck-mounted faucets, check the mounting holes and deck thickness.","To switch from a pull-out faucet to a non-pull-out faucet, the new faucet body's mounting and water supply connection requirements must be met.","Check head and pull-out hose compatibility using the connections at both ends and the manufacturer's part numbers.","Whether a filter can be attached must be assessed separately from whether the faucet body can be installed.","If dimensions differ between official documents, confirm the product number and measurement criteria with the manufacturer."],"content_markdown":"The requirements for replacing a kitchen faucet depend on whether it is wall-mounted or deck-mounted. The mounting dimensions and water supply connection specifications must match. When switching between pull-out and non-pull-out designs, you also need to check the mounting hardware and space underneath.\n\nThe dimensions are based on IKEA and hansgrohe product documents. Check each official product page for the latest specifications.\n\n## Differences Between Wall-Mounted and Deck-Mounted Faucets\n\nWall-mounted and deck-mounted faucets differ in where the body is secured. A wall-mounted faucet connects to water supply pipes extending from the wall. A deck-mounted faucet is secured in a hole in the sink rim or countertop.\n\n| Category | Wall-mounted | Deck-mounted |\n|---|---|---|\n| Where the body is secured | Water supply pipe connections on the wall | Sink rim or countertop |\n| Dimensions to check first | Center-to-center spacing of the cold and hot water pipes | Diameter and number of mounting holes, countertop thickness |\n| Connections to check | Wall pipe threads and connection fittings | Connections between supply hoses and shutoff valves |\n| Space to check | Distance from the wall to the spout tip | Space underneath for mounting hardware and hose movement |\n\nA pull-out design means the head and hose can be pulled out for use. This is separate from the wall-mounted or deck-mounted installation category. Shape descriptions such as gooseneck alone do not tell you the installation specifications.\n\n## Kitchen Faucet Specification Checklist\n\nCheck compatibility by comparing actual measurements of the existing installation with the new product's drawings. The body fitting into the hole does not mean all installation requirements are met. There must also be room underneath to assemble the mounting hardware.\n\n| Item to check | What to check at the existing installation | What to compare in the manufacturer's documents |\n|---|---|---|\n| Number of mounting holes | Holes occupied by the body and separate components | Number of holes required for the body, handle, sprayer, and other components |\n| Mounting hole diameter | Diameter of the actual hole, not the decorative cover | Permitted diameter or range |\n| Countertop thickness | Thickness where the body is secured | Permitted thickness and mounting hardware configuration |\n| Pipe center spacing | Distance between the centers of the cold and hot water connections on the wall | Permitted spacing and connection fitting requirements |\n| Connection threads | Thread markings and whether threads are internal or external | Thread specifications and designated connection parts |\n| Hose length | Actual route to the connection point | Hose length and installation requirements |\n| Space underneath | Locations of mounting nuts, drain pipes, and stored items | Space required for mounting hardware and the pull-out hose |\n| Space above | Distance from walls, windows, and shelves | Body height, spout length, and swivel range |\n\n### Official Dimensions Apply Only to Specific Models\n\nA manufacturer's dimensions apply to the relevant product number. The technical information for IKEA ÄLMAREN 305.670.01 is shown below. The hansgrohe wall-mounted product specifies its own center spacing.\n\n| Product and document | Item checked | Stated in the document |\n|---|---|---|\n| IKEA ÄLMAREN 305.670.01 technical information | Mounting hole | Diameter 34~37 mm |\n| Technical information for the same product | Maximum countertop thickness | 50 mm |\n| Technical information for the same product | Hose connection | G 1/2 inch |\n| hansgrohe Logis M32 71286000 product specifications | Pipe center spacing | 150 ± 12 mm |\n\nThis table shows examples of how to read the documents for two products. It does not mean all deck-mounted faucets use the same hole. The connection range for wall-mounted faucets must also be checked for each model. The sources are the [IKEA product technical information](https://www.ikea.com/kr/ko/p/aelmaren-kitchen-mixer-tap-stainless-steel-colour-30567001/) and [hansgrohe product specifications](https://pro.hansgrohe.com/articledetail-logis-m32-2-handle-kitchen-mixer-wall-mounted-highspout-1jet-71286000).\n\n## Distinguishing the Body, Head, Pull-Out Hose, and Supply Hoses\n\nComponent compatibility is determined by the connections at both ends of the component. Supply hoses carry water from the pipes to the body. A pull-out hose carries water from the body to the movable head.\n\n| Component | Role | What to check when replacing it |\n|---|---|---|\n| Faucet body | Main unit that controls water flow and temperature | Mounting type, mounting dimensions, water supply connections |\n| Head | End component where water comes out | Hose connection, seals, and how it seats in the body |\n| Pull-out hose | Connects the head while allowing it to move | Connections at both ends, length, designated part number |\n| Supply hose | Connects the cold or hot water pipe to the body | Connection specifications at both ends, length, whether the design allows replacement |\n| Mounting hardware | Secures the body to the mounting surface | Nut and support plate configuration, permitted countertop thickness |\n\nKitchen faucet hose specifications cannot be described by length alone. You must also distinguish between threaded and push-to-lock connections. Seals prevent water from leaking at the connections.\n\nMoen's hose identification guide prioritizes checking the model number. It also covers cases where several hoses have been used for the same model. In these cases, you must also compare the connections at both ends of the hose. The source is the [Moen retractable hose identification guide](https://solutions.moen.com/Article_Library/Faucet_Hose-Retractable).\n\n## Requirements for Switching from Pull-Out to Non-Pull-Out\n\nReplacing the body with one without a pull-out function may be possible, depending on the installation conditions. The new body's mounting method must suit the existing installation. The new supply hoses must also be able to connect to the existing pipes.\n\n| Change | Criteria | Additional checks |\n|---|---|---|\n| Changing from a deck-mounted pull-out faucet to a deck-mounted non-pull-out faucet | Meets the new body's hole and thickness requirements | Mounting hardware and supply hose routes |\n| Changing from a deck-mounted non-pull-out faucet to a deck-mounted pull-out faucet | Meets the body's installation requirements | Space underneath for the hose and counterweight to move |\n| Replacing only the head or pull-out hose | Confirm that the part is designated for the existing body | Connections at both ends and seal configuration |\n| Changing from wall-mounted to deck-mounted | Whether the mounting location and water supply route can be changed | Countertop hole and plan for handling the existing pipes |\n\nReplacing the entire body is different from reusing existing components. Whether the existing pull-out hose fits the new body must be checked separately. Even if the new design does not need a pull-out hose, space for the water supply connections must remain.\n\nFor a pull-out faucet, you must also check how the hose moves after installation. Moen provides guidance on hoses and counterweights catching on obstructions underneath. The positions of drain pipes and stored items can affect pull-out operation. The relevant source is [Moen's guide to hoses catching underneath the sink](https://solutions.moen.com/FAQ%27s/FAQ%27s-Kitchen_And_Bar/Maintenance/The_hose_for_my_pullout%2F%2Fpulldown_faucet_keeps_getting_caught_by_various_obstructions_in_the_cabinet_below.__What_can_be_done_to_alleviate_this_issue%3F).\n\n## Compatibility Requirements for Filters and Heads\n\nBeing able to install a faucet does not mean an existing filter will also fit. For a filter, the design of the water outlet must be checked separately. The body's water supply connection specifications cannot be used as the filter connection specifications.\n\n| Item to check | Conditions to check |\n|---|---|\n| Faucet-mounted filter | Outlet threads and specifications supported by the adapter |\n| Head with a spray function | Whether the filter manufacturer supports that design |\n| Replacement pull-out head | Hose connection and how the head seats in the body |\n| Reusing an existing filter | Official compatibility guidance for the new faucet model |\n\nThe Brita SAFF-100 manual excludes faucets with a built-in spray function at the tip. This restriction applies to that filter model. For other filters, check the supported designs in each product's manual. The source is the [Brita SAFF-100 user manual](https://www.brita.com/wp-content/uploads/024_BRT_BC_SAFF-100_UsersGuide.pdf).\n\n## When Dimensions Differ Between Official Documents\n\nIf official documents list different dimensions, first check what each measurement refers to. Even if the product names are the same, compare the product numbers as well. The manual's document number and revision date should also be checked.\n\nThe IKEA ÄLMAREN product page lists a connection length of 50 cm. The technical information on the same page gives a hose length of 550 mm. Converting 50 cm gives 500 mm. The labels alone do not make it clear whether the two measurements refer to the same section.\n\nIn this situation, you must not choose the longer measurement and conclude that installation is possible. Provide the manufacturer with the product number and both listed measurements. You need to confirm the length actually available for the connection. You can compare these entries in the [additional and technical information on the IKEA product page](https://www.ikea.com/kr/ko/p/aelmaren-kitchen-mixer-tap-stainless-steel-colour-30567001/).\n\nThe following records are helpful when asking about specifications.\n\n- Product number and manual document number\n- Actual installation measurements and units\n- Photos above and below the countertop and of the connections\n- Items listed differently and their locations in the documents\n\n## Scope and Cost of Kitchen Faucet Replacement\n\nWhen considering replacement costs, separate the product price from the scope of work on site. IKEA's installation guide also explains that costs vary depending on installation and removal conditions. Replacing only a faucet is not the same job as installing an entire kitchen sink unit. The source is the [IKEA installation service guide](https://www.ikea.com/kr/ko/customer-service/services/installation/).\n\n| Quote item | What to check |\n|---|---|\n| Product price | Whether the body and necessary connection parts are included |\n| Installation work | Whether removal of the existing body and installation of the new body are included |\n| Additional work | Whether work on valves, pipes, or the countertop is needed |\n| Incidental costs | Whether call-out, disposal, or other fees are charged separately |\n| Post-installation checks | Scope of checks for connection leaks and operation |\n\nThe time required is also difficult to determine without inspecting the installation. Do not proceed with disconnection if the valve cannot shut off the water. If the existing pipes also move or the mounting hardware will not loosen, the scope of work must be reassessed.\n\n### Safety Conditions to Check Before Disconnecting and Connecting\n\nShut off the water supply before disconnecting a faucet or hose. Moen's hose replacement guide explicitly instructs users to close the shutoff valves.\n\n\u003e The water supply shut off valves must be turned off\n\u003e\n\u003e Moen, How to Install a 150259, 202750 or 212650 Hose\n\nThe following is a sequence of safety checks, not a complete installation procedure. Follow the relevant model's manual for the actual assembly sequence.\n\n1. Before disconnecting, close the water supply valve specified in the manual. The IKEA ÄLMAREN manual instructs users to close the main shutoff valve. If the water supply does not stop, stop the disconnection work.\n2. When connecting, use the parts and tightening method specified in the manual. The IKEA manual prohibits overtightening because it can damage hoses, pipes, and washers.\n3. After installation, check the connections for leaks. The IKEA manual also requires regular leak checks afterward.\n\nThe safety conditions are based on the [Moen hose replacement guide](https://solutions.moen.com/Article_Library/How_to_Install_a_150259%252C_202750_or_212650_Hose). The IKEA information follows the [ÄLMAREN assembly instructions](https://www.ikea.com/kr/ko/assembly_instructions/aelmaren-kitchen-mixer-tap-stainless-steel-colour__AA-2258901-3-2.pdf). The date shown in these instructions is April 12, 2024.\n\n## Common Mistakes\n\nA common error when assessing compatibility is checking only one condition. Even if the hole diameter matches, the mounting hardware may not fit. Even if the connection threads match, the hose may be too short or lack room to move.\n\n| Mistaken assumption | What to check again |\n|---|---|\n| All single-hole products have the same specifications | Hole diameter, countertop thickness, mounting hardware |\n| Hoses from the same brand are interchangeable | Model-specific part numbers and connections at both ends |\n| Heads can be swapped between pull-out faucets | Hose connection, seals, and how the head seats |\n| If the connection threads match, the filter will fit too | Outlet designs supported by the filter |\n| Leaks can be fixed by tightening more firmly | The manual's tightening instructions and the condition of the parts |\n| One product's dimensions can be used as a universal standard | Drawings for the replacement product and the actual installation |\n\n## Frequently Asked Questions\n\n### Do All Single-Hole Faucets Use the Same Mounting Hole?\n\nSingle-hole means the body uses one hole for installation. It does not mean the hole diameter and permitted countertop thickness are also the same. Compare the installation drawings for the actual product.\n\n### Is Matching the Pipe Spacing Enough for a Wall-Mounted Faucet?\n\nCenter spacing alone cannot confirm whether installation is possible. The connection threads and fittings must also meet the requirements. The condition of the pipes extending from the wall must also be checked.\n\n### Do the Pipes Need to Be Replaced When Switching from Pull-Out to Non-Pull-Out?\n\nRemoving the pull-out function alone does not determine whether the pipes need replacing. The deciding factor is whether the new body's water supply connections match the existing pipes. If you also change the mounting type, the water supply route must be reviewed.\n\n### Can Just the Hose Be Replaced?\n\nThe hose can be replaced if the design has a manufacturer-designated replacement part. First check the body model and hose part number. Do not substitute a hose simply because it looks similar.\n\n### If the Faucet Fits, Can the Existing Filter Still Be Used?\n\nFilter compatibility must be checked separately. The threads and spray design at the faucet tip are the deciding factors. Do not install the filter on a design excluded by its manual.\n\n### What Should Be Checked First If the Product Number Is Unknown?\n\nYou can look for model information on the receipt, packaging, or a saved manual. If you cannot find it, provide the manufacturer with photos of the entire faucet and its connections. Do not determine component specifications from appearance alone.","content_html":"\u003cp\u003eThe requirements for replacing a kitchen faucet depend on whether it is wall-mounted or deck-mounted. The mounting dimensions and water supply connection specifications must match. When switching between pull-out and non-pull-out designs, you also need to check the mounting hardware and space underneath.\u003c/p\u003e\n\u003cp\u003eThe dimensions are based on IKEA and hansgrohe product documents. Check each official product page for the latest specifications.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#differences-between-wall-mounted-and-deck-mounted-faucets\" class=\"anchor\" id=\"differences-between-wall-mounted-and-deck-mounted-faucets\"\u003e\u003c/a\u003eDifferences Between Wall-Mounted and Deck-Mounted Faucets\u003c/h2\u003e\n\u003cp\u003eWall-mounted and deck-mounted faucets differ in where the body is secured. A wall-mounted faucet connects to water supply pipes extending from the wall. A deck-mounted faucet is secured in a hole in the sink rim or countertop.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c/th\u003e\n\u003cth\u003eWall-mounted\u003c/th\u003e\n\u003cth\u003eDeck-mounted\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Category\"\u003eWhere the body is secured\u003c/td\u003e\n\u003ctd data-label=\"Wall-mounted\"\u003eWater supply pipe connections on the wall\u003c/td\u003e\n\u003ctd data-label=\"Deck-mounted\"\u003eSink rim or countertop\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Category\"\u003eDimensions to check first\u003c/td\u003e\n\u003ctd data-label=\"Wall-mounted\"\u003eCenter-to-center spacing of the cold and hot water pipes\u003c/td\u003e\n\u003ctd data-label=\"Deck-mounted\"\u003eDiameter and number of mounting holes, countertop thickness\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Category\"\u003eConnections to check\u003c/td\u003e\n\u003ctd data-label=\"Wall-mounted\"\u003eWall pipe threads and connection fittings\u003c/td\u003e\n\u003ctd data-label=\"Deck-mounted\"\u003eConnections between supply hoses and shutoff valves\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Category\"\u003eSpace to check\u003c/td\u003e\n\u003ctd data-label=\"Wall-mounted\"\u003eDistance from the wall to the spout tip\u003c/td\u003e\n\u003ctd data-label=\"Deck-mounted\"\u003eSpace underneath for mounting hardware and hose movement\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eA pull-out design means the head and hose can be pulled out for use. This is separate from the wall-mounted or deck-mounted installation category. Shape descriptions such as gooseneck alone do not tell you the installation specifications.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#kitchen-faucet-specification-checklist\" class=\"anchor\" id=\"kitchen-faucet-specification-checklist\"\u003e\u003c/a\u003eKitchen Faucet Specification Checklist\u003c/h2\u003e\n\u003cp\u003eCheck compatibility by comparing actual measurements of the existing installation with the new product's drawings. The body fitting into the hole does not mean all installation requirements are met. There must also be room underneath to assemble the mounting hardware.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem to check\u003c/th\u003e\n\u003cth\u003eWhat to check at the existing installation\u003c/th\u003e\n\u003cth\u003eWhat to compare in the manufacturer's documents\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eNumber of mounting holes\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eHoles occupied by the body and separate components\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003eNumber of holes required for the body, handle, sprayer, and other components\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eMounting hole diameter\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eDiameter of the actual hole, not the decorative cover\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003ePermitted diameter or range\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eCountertop thickness\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eThickness where the body is secured\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003ePermitted thickness and mounting hardware configuration\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003ePipe center spacing\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eDistance between the centers of the cold and hot water connections on the wall\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003ePermitted spacing and connection fitting requirements\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eConnection threads\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eThread markings and whether threads are internal or external\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003eThread specifications and designated connection parts\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eHose length\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eActual route to the connection point\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003eHose length and installation requirements\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eSpace underneath\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eLocations of mounting nuts, drain pipes, and stored items\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003eSpace required for mounting hardware and the pull-out hose\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eSpace above\u003c/td\u003e\n\u003ctd data-label=\"What to check at the existing installation\"\u003eDistance from walls, windows, and shelves\u003c/td\u003e\n\u003ctd data-label=\"What to compare in the manufacturer's documents\"\u003eBody height, spout length, and swivel range\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003ch3\u003e\n\u003ca href=\"#official-dimensions-apply-only-to-specific-models\" class=\"anchor\" id=\"official-dimensions-apply-only-to-specific-models\"\u003e\u003c/a\u003eOfficial Dimensions Apply Only to Specific Models\u003c/h3\u003e\n\u003cp\u003eA manufacturer's dimensions apply to the relevant product number. The technical information for IKEA ÄLMAREN 305.670.01 is shown below. The hansgrohe wall-mounted product specifies its own center spacing.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct and document\u003c/th\u003e\n\u003cth\u003eItem checked\u003c/th\u003e\n\u003cth\u003eStated in the document\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Product and document\"\u003eIKEA ÄLMAREN 305.670.01 technical information\u003c/td\u003e\n\u003ctd data-label=\"Item checked\"\u003eMounting hole\u003c/td\u003e\n\u003ctd data-label=\"Stated in the document\"\u003eDiameter 34~37 mm\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Product and document\"\u003eTechnical information for the same product\u003c/td\u003e\n\u003ctd data-label=\"Item checked\"\u003eMaximum countertop thickness\u003c/td\u003e\n\u003ctd data-label=\"Stated in the document\"\u003e50 mm\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Product and document\"\u003eTechnical information for the same product\u003c/td\u003e\n\u003ctd data-label=\"Item checked\"\u003eHose connection\u003c/td\u003e\n\u003ctd data-label=\"Stated in the document\"\u003eG 1/2 inch\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Product and document\"\u003ehansgrohe Logis M32 71286000 product specifications\u003c/td\u003e\n\u003ctd data-label=\"Item checked\"\u003ePipe center spacing\u003c/td\u003e\n\u003ctd data-label=\"Stated in the document\"\u003e150 ± 12 mm\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eThis table shows examples of how to read the documents for two products. It does not mean all deck-mounted faucets use the same hole. The connection range for wall-mounted faucets must also be checked for each model. The sources are the \u003ca href=\"https://www.ikea.com/kr/ko/p/aelmaren-kitchen-mixer-tap-stainless-steel-colour-30567001/\"\u003eIKEA product technical information\u003c/a\u003e and \u003ca href=\"https://pro.hansgrohe.com/articledetail-logis-m32-2-handle-kitchen-mixer-wall-mounted-highspout-1jet-71286000\"\u003ehansgrohe product specifications\u003c/a\u003e.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#distinguishing-the-body-head-pull-out-hose-and-supply-hoses\" class=\"anchor\" id=\"distinguishing-the-body-head-pull-out-hose-and-supply-hoses\"\u003e\u003c/a\u003eDistinguishing the Body, Head, Pull-Out Hose, and Supply Hoses\u003c/h2\u003e\n\u003cp\u003eComponent compatibility is determined by the connections at both ends of the component. Supply hoses carry water from the pipes to the body. A pull-out hose carries water from the body to the movable head.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c/th\u003e\n\u003cth\u003eRole\u003c/th\u003e\n\u003cth\u003eWhat to check when replacing it\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Component\"\u003eFaucet body\u003c/td\u003e\n\u003ctd data-label=\"Role\"\u003eMain unit that controls water flow and temperature\u003c/td\u003e\n\u003ctd data-label=\"What to check when replacing it\"\u003eMounting type, mounting dimensions, water supply connections\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Component\"\u003eHead\u003c/td\u003e\n\u003ctd data-label=\"Role\"\u003eEnd component where water comes out\u003c/td\u003e\n\u003ctd data-label=\"What to check when replacing it\"\u003eHose connection, seals, and how it seats in the body\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Component\"\u003ePull-out hose\u003c/td\u003e\n\u003ctd data-label=\"Role\"\u003eConnects the head while allowing it to move\u003c/td\u003e\n\u003ctd data-label=\"What to check when replacing it\"\u003eConnections at both ends, length, designated part number\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Component\"\u003eSupply hose\u003c/td\u003e\n\u003ctd data-label=\"Role\"\u003eConnects the cold or hot water pipe to the body\u003c/td\u003e\n\u003ctd data-label=\"What to check when replacing it\"\u003eConnection specifications at both ends, length, whether the design allows replacement\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Component\"\u003eMounting hardware\u003c/td\u003e\n\u003ctd data-label=\"Role\"\u003eSecures the body to the mounting surface\u003c/td\u003e\n\u003ctd data-label=\"What to check when replacing it\"\u003eNut and support plate configuration, permitted countertop thickness\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eKitchen faucet hose specifications cannot be described by length alone. You must also distinguish between threaded and push-to-lock connections. Seals prevent water from leaking at the connections.\u003c/p\u003e\n\u003cp\u003eMoen's hose identification guide prioritizes checking the model number. It also covers cases where several hoses have been used for the same model. In these cases, you must also compare the connections at both ends of the hose. The source is the \u003ca href=\"https://solutions.moen.com/Article_Library/Faucet_Hose-Retractable\"\u003eMoen retractable hose identification guide\u003c/a\u003e.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#requirements-for-switching-from-pull-out-to-non-pull-out\" class=\"anchor\" id=\"requirements-for-switching-from-pull-out-to-non-pull-out\"\u003e\u003c/a\u003eRequirements for Switching from Pull-Out to Non-Pull-Out\u003c/h2\u003e\n\u003cp\u003eReplacing the body with one without a pull-out function may be possible, depending on the installation conditions. The new body's mounting method must suit the existing installation. The new supply hoses must also be able to connect to the existing pipes.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChange\u003c/th\u003e\n\u003cth\u003eCriteria\u003c/th\u003e\n\u003cth\u003eAdditional checks\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Change\"\u003eChanging from a deck-mounted pull-out faucet to a deck-mounted non-pull-out faucet\u003c/td\u003e\n\u003ctd data-label=\"Criteria\"\u003eMeets the new body's hole and thickness requirements\u003c/td\u003e\n\u003ctd data-label=\"Additional checks\"\u003eMounting hardware and supply hose routes\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Change\"\u003eChanging from a deck-mounted non-pull-out faucet to a deck-mounted pull-out faucet\u003c/td\u003e\n\u003ctd data-label=\"Criteria\"\u003eMeets the body's installation requirements\u003c/td\u003e\n\u003ctd data-label=\"Additional checks\"\u003eSpace underneath for the hose and counterweight to move\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Change\"\u003eReplacing only the head or pull-out hose\u003c/td\u003e\n\u003ctd data-label=\"Criteria\"\u003eConfirm that the part is designated for the existing body\u003c/td\u003e\n\u003ctd data-label=\"Additional checks\"\u003eConnections at both ends and seal configuration\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Change\"\u003eChanging from wall-mounted to deck-mounted\u003c/td\u003e\n\u003ctd data-label=\"Criteria\"\u003eWhether the mounting location and water supply route can be changed\u003c/td\u003e\n\u003ctd data-label=\"Additional checks\"\u003eCountertop hole and plan for handling the existing pipes\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eReplacing the entire body is different from reusing existing components. Whether the existing pull-out hose fits the new body must be checked separately. Even if the new design does not need a pull-out hose, space for the water supply connections must remain.\u003c/p\u003e\n\u003cp\u003eFor a pull-out faucet, you must also check how the hose moves after installation. Moen provides guidance on hoses and counterweights catching on obstructions underneath. The positions of drain pipes and stored items can affect pull-out operation. The relevant source is \u003ca href=\"https://solutions.moen.com/FAQ%27s/FAQ%27s-Kitchen_And_Bar/Maintenance/The_hose_for_my_pullout%2F%2Fpulldown_faucet_keeps_getting_caught_by_various_obstructions_in_the_cabinet_below.__What_can_be_done_to_alleviate_this_issue%3F\"\u003eMoen's guide to hoses catching underneath the sink\u003c/a\u003e.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#compatibility-requirements-for-filters-and-heads\" class=\"anchor\" id=\"compatibility-requirements-for-filters-and-heads\"\u003e\u003c/a\u003eCompatibility Requirements for Filters and Heads\u003c/h2\u003e\n\u003cp\u003eBeing able to install a faucet does not mean an existing filter will also fit. For a filter, the design of the water outlet must be checked separately. The body's water supply connection specifications cannot be used as the filter connection specifications.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem to check\u003c/th\u003e\n\u003cth\u003eConditions to check\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eFaucet-mounted filter\u003c/td\u003e\n\u003ctd data-label=\"Conditions to check\"\u003eOutlet threads and specifications supported by the adapter\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eHead with a spray function\u003c/td\u003e\n\u003ctd data-label=\"Conditions to check\"\u003eWhether the filter manufacturer supports that design\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eReplacement pull-out head\u003c/td\u003e\n\u003ctd data-label=\"Conditions to check\"\u003eHose connection and how the head seats in the body\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Item to check\"\u003eReusing an existing filter\u003c/td\u003e\n\u003ctd data-label=\"Conditions to check\"\u003eOfficial compatibility guidance for the new faucet model\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eThe Brita SAFF-100 manual excludes faucets with a built-in spray function at the tip. This restriction applies to that filter model. For other filters, check the supported designs in each product's manual. The source is the \u003ca href=\"https://www.brita.com/wp-content/uploads/024_BRT_BC_SAFF-100_UsersGuide.pdf\"\u003eBrita SAFF-100 user manual\u003c/a\u003e.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#when-dimensions-differ-between-official-documents\" class=\"anchor\" id=\"when-dimensions-differ-between-official-documents\"\u003e\u003c/a\u003eWhen Dimensions Differ Between Official Documents\u003c/h2\u003e\n\u003cp\u003eIf official documents list different dimensions, first check what each measurement refers to. Even if the product names are the same, compare the product numbers as well. The manual's document number and revision date should also be checked.\u003c/p\u003e\n\u003cp\u003eThe IKEA ÄLMAREN product page lists a connection length of 50 cm. The technical information on the same page gives a hose length of 550 mm. Converting 50 cm gives 500 mm. The labels alone do not make it clear whether the two measurements refer to the same section.\u003c/p\u003e\n\u003cp\u003eIn this situation, you must not choose the longer measurement and conclude that installation is possible. Provide the manufacturer with the product number and both listed measurements. You need to confirm the length actually available for the connection. You can compare these entries in the \u003ca href=\"https://www.ikea.com/kr/ko/p/aelmaren-kitchen-mixer-tap-stainless-steel-colour-30567001/\"\u003eadditional and technical information on the IKEA product page\u003c/a\u003e.\u003c/p\u003e\n\u003cp\u003eThe following records are helpful when asking about specifications.\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct number and manual document number\u003c/li\u003e\n\u003cli\u003eActual installation measurements and units\u003c/li\u003e\n\u003cli\u003ePhotos above and below the countertop and of the connections\u003c/li\u003e\n\u003cli\u003eItems listed differently and their locations in the documents\u003c/li\u003e\n\u003c/ul\u003e\n\u003ch2\u003e\n\u003ca href=\"#scope-and-cost-of-kitchen-faucet-replacement\" class=\"anchor\" id=\"scope-and-cost-of-kitchen-faucet-replacement\"\u003e\u003c/a\u003eScope and Cost of Kitchen Faucet Replacement\u003c/h2\u003e\n\u003cp\u003eWhen considering replacement costs, separate the product price from the scope of work on site. IKEA's installation guide also explains that costs vary depending on installation and removal conditions. Replacing only a faucet is not the same job as installing an entire kitchen sink unit. The source is the \u003ca href=\"https://www.ikea.com/kr/ko/customer-service/services/installation/\"\u003eIKEA installation service guide\u003c/a\u003e.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eQuote item\u003c/th\u003e\n\u003cth\u003eWhat to check\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Quote item\"\u003eProduct price\u003c/td\u003e\n\u003ctd data-label=\"What to check\"\u003eWhether the body and necessary connection parts are included\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Quote item\"\u003eInstallation work\u003c/td\u003e\n\u003ctd data-label=\"What to check\"\u003eWhether removal of the existing body and installation of the new body are included\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Quote item\"\u003eAdditional work\u003c/td\u003e\n\u003ctd data-label=\"What to check\"\u003eWhether work on valves, pipes, or the countertop is needed\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Quote item\"\u003eIncidental costs\u003c/td\u003e\n\u003ctd data-label=\"What to check\"\u003eWhether call-out, disposal, or other fees are charged separately\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Quote item\"\u003ePost-installation checks\u003c/td\u003e\n\u003ctd data-label=\"What to check\"\u003eScope of checks for connection leaks and operation\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eThe time required is also difficult to determine without inspecting the installation. Do not proceed with disconnection if the valve cannot shut off the water. If the existing pipes also move or the mounting hardware will not loosen, the scope of work must be reassessed.\u003c/p\u003e\n\u003ch3\u003e\n\u003ca href=\"#safety-conditions-to-check-before-disconnecting-and-connecting\" class=\"anchor\" id=\"safety-conditions-to-check-before-disconnecting-and-connecting\"\u003e\u003c/a\u003eSafety Conditions to Check Before Disconnecting and Connecting\u003c/h3\u003e\n\u003cp\u003eShut off the water supply before disconnecting a faucet or hose. Moen's hose replacement guide explicitly instructs users to close the shutoff valves.\u003c/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThe water supply shut off valves must be turned off\u003c/p\u003e\n\u003cp\u003eMoen, How to Install a 150259, 202750 or 212650 Hose\u003c/p\u003e\n\u003c/blockquote\u003e\n\u003cp\u003eThe following is a sequence of safety checks, not a complete installation procedure. Follow the relevant model's manual for the actual assembly sequence.\u003c/p\u003e\n\u003col\u003e\n\u003cli\u003eBefore disconnecting, close the water supply valve specified in the manual. The IKEA ÄLMAREN manual instructs users to close the main shutoff valve. If the water supply does not stop, stop the disconnection work.\u003c/li\u003e\n\u003cli\u003eWhen connecting, use the parts and tightening method specified in the manual. The IKEA manual prohibits overtightening because it can damage hoses, pipes, and washers.\u003c/li\u003e\n\u003cli\u003eAfter installation, check the connections for leaks. The IKEA manual also requires regular leak checks afterward.\u003c/li\u003e\n\u003c/ol\u003e\n\u003cp\u003eThe safety conditions are based on the \u003ca href=\"https://solutions.moen.com/Article_Library/How_to_Install_a_150259%252C_202750_or_212650_Hose\"\u003eMoen hose replacement guide\u003c/a\u003e. The IKEA information follows the \u003ca href=\"https://www.ikea.com/kr/ko/assembly_instructions/aelmaren-kitchen-mixer-tap-stainless-steel-colour__AA-2258901-3-2.pdf\"\u003eÄLMAREN assembly instructions\u003c/a\u003e. The date shown in these instructions is April 12, 2024.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#common-mistakes\" class=\"anchor\" id=\"common-mistakes\"\u003e\u003c/a\u003eCommon Mistakes\u003c/h2\u003e\n\u003cp\u003eA common error when assessing compatibility is checking only one condition. Even if the hole diameter matches, the mounting hardware may not fit. Even if the connection threads match, the hose may be too short or lack room to move.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMistaken assumption\u003c/th\u003e\n\u003cth\u003eWhat to check again\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Mistaken assumption\"\u003eAll single-hole products have the same specifications\u003c/td\u003e\n\u003ctd data-label=\"What to check again\"\u003eHole diameter, countertop thickness, mounting hardware\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Mistaken assumption\"\u003eHoses from the same brand are interchangeable\u003c/td\u003e\n\u003ctd data-label=\"What to check again\"\u003eModel-specific part numbers and connections at both ends\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Mistaken assumption\"\u003eHeads can be swapped between pull-out faucets\u003c/td\u003e\n\u003ctd data-label=\"What to check again\"\u003eHose connection, seals, and how the head seats\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Mistaken assumption\"\u003eIf the connection threads match, the filter will fit too\u003c/td\u003e\n\u003ctd data-label=\"What to check again\"\u003eOutlet designs supported by the filter\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Mistaken assumption\"\u003eLeaks can be fixed by tightening more firmly\u003c/td\u003e\n\u003ctd data-label=\"What to check again\"\u003eThe manual's tightening instructions and the condition of the parts\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Mistaken assumption\"\u003eOne product's dimensions can be used as a universal standard\u003c/td\u003e\n\u003ctd data-label=\"What to check again\"\u003eDrawings for the replacement product and the actual installation\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003ch2\u003e\n\u003ca href=\"#frequently-asked-questions\" class=\"anchor\" id=\"frequently-asked-questions\"\u003e\u003c/a\u003eFrequently Asked Questions\u003c/h2\u003e\n\u003ch3\u003e\n\u003ca href=\"#do-all-single-hole-faucets-use-the-same-mounting-hole\" class=\"anchor\" id=\"do-all-single-hole-faucets-use-the-same-mounting-hole\"\u003e\u003c/a\u003eDo All Single-Hole Faucets Use the Same Mounting Hole?\u003c/h3\u003e\n\u003cp\u003eSingle-hole means the body uses one hole for installation. It does not mean the hole diameter and permitted countertop thickness are also the same. Compare the installation drawings for the actual product.\u003c/p\u003e\n\u003ch3\u003e\n\u003ca href=\"#is-matching-the-pipe-spacing-enough-for-a-wall-mounted-faucet\" class=\"anchor\" id=\"is-matching-the-pipe-spacing-enough-for-a-wall-mounted-faucet\"\u003e\u003c/a\u003eIs Matching the Pipe Spacing Enough for a Wall-Mounted Faucet?\u003c/h3\u003e\n\u003cp\u003eCenter spacing alone cannot confirm whether installation is possible. The connection threads and fittings must also meet the requirements. The condition of the pipes extending from the wall must also be checked.\u003c/p\u003e\n\u003ch3\u003e\n\u003ca href=\"#do-the-pipes-need-to-be-replaced-when-switching-from-pull-out-to-non-pull-out\" class=\"anchor\" id=\"do-the-pipes-need-to-be-replaced-when-switching-from-pull-out-to-non-pull-out\"\u003e\u003c/a\u003eDo the Pipes Need to Be Replaced When Switching from Pull-Out to Non-Pull-Out?\u003c/h3\u003e\n\u003cp\u003eRemoving the pull-out function alone does not determine whether the pipes need replacing. The deciding factor is whether the new body's water supply connections match the existing pipes. If you also change the mounting type, the water supply route must be reviewed.\u003c/p\u003e\n\u003ch3\u003e\n\u003ca href=\"#can-just-the-hose-be-replaced\" class=\"anchor\" id=\"can-just-the-hose-be-replaced\"\u003e\u003c/a\u003eCan Just the Hose Be Replaced?\u003c/h3\u003e\n\u003cp\u003eThe hose can be replaced if the design has a manufacturer-designated replacement part. First check the body model and hose part number. Do not substitute a hose simply because it looks similar.\u003c/p\u003e\n\u003ch3\u003e\n\u003ca href=\"#if-the-faucet-fits-can-the-existing-filter-still-be-used\" class=\"anchor\" id=\"if-the-faucet-fits-can-the-existing-filter-still-be-used\"\u003e\u003c/a\u003eIf the Faucet Fits, Can the Existing Filter Still Be Used?\u003c/h3\u003e\n\u003cp\u003eFilter compatibility must be checked separately. The threads and spray design at the faucet tip are the deciding factors. Do not install the filter on a design excluded by its manual.\u003c/p\u003e\n\u003ch3\u003e\n\u003ca href=\"#what-should-be-checked-first-if-the-product-number-is-unknown\" class=\"anchor\" id=\"what-should-be-checked-first-if-the-product-number-is-unknown\"\u003e\u003c/a\u003eWhat Should Be Checked First If the Product Number Is Unknown?\u003c/h3\u003e\n\u003cp\u003eYou can look for model information on the receipt, packaging, or a saved manual. If you cannot find it, provide the manufacturer with photos of the entire faucet and its connections. Do not determine component specifications from appearance alone.\u003c/p\u003e\n","tags":["Water leaks","Kitchenware","Household essentials"],"faqs":[{"question":"Are the mounting holes the same for all single-hole faucets?","answer":"Single-hole means that the faucet body uses one hole for installation. The hole diameter and allowable countertop thickness must be checked for each product."},{"question":"Can a wall-mounted faucet be installed as long as the pipe center spacing matches?","answer":"Besides the center spacing, the connection threads and fitting requirements must also match. The condition of the existing pipes must also be checked."},{"question":"Can a pull-out faucet be replaced with a non-pull-out faucet?","answer":"Yes, if the mounting and water supply connection requirements for the new faucet body are met. Whether the existing pull-out hose can be reused must be checked separately."},{"question":"What is the difference between a water supply hose and a pull-out hose?","answer":"A water supply hose supplies water from the pipes to the faucet body. A pull-out hose carries water from the body to the movable head."},{"question":"Are hoses from the same brand interchangeable?","answer":"Hoses are not interchangeable just because they are from the same brand. The faucet body model and specified part number must be checked. The connectors at both ends of the hose must also be compared."},{"question":"Can an existing faucet filter be attached to a new faucet as it is?","answer":"The new faucet's outlet design must meet the filter's compatibility requirements. Matching water supply connection specifications alone do not establish filter compatibility."},{"question":"Which hose length should be followed if official documents give different lengths?","answer":"The product number and the measurement criteria in each document must be checked. Show the differing specifications to the manufacturer to confirm the actual length available for connection."},{"question":"Should the water supply valve be shut off before replacing a faucet?","answer":"The water supply valve specified in the instructions must be closed before disconnecting the faucet or hose. If the water supply does not stop, the disconnection work must be stopped."},{"question":"Can a leaking connection be fixed by tightening it more?","answer":"Do not try to fix a leak by overtightening. The IKEA ÄLMAREN instructions warn that overtightening can damage hoses, pipes, and washers."},{"question":"What should be checked when comparing faucet replacement costs?","answer":"The product price and installation labor costs must be distinguished. Also check whether removal, connection parts, plumbing work, service calls, and similar items are included."}],"sources":[{"url":"https://www.ikea.com/kr/ko/p/aelmaren-kitchen-mixer-tap-stainless-steel-colour-30567001/","title":"IKEA ÄLMAREN 305.670.01 product description and technical information","type":"data_point"},{"url":"https://www.ikea.com/kr/ko/assembly_instructions/aelmaren-kitchen-mixer-tap-stainless-steel-colour__AA-2258901-3-2.pdf","title":"IKEA ÄLMAREN assembly instructions AA-2258901-3, April 12, 2024","type":"source"},{"url":"https://pro.hansgrohe.com/articledetail-logis-m32-2-handle-kitchen-mixer-wall-mounted-highspout-1jet-71286000","title":"hansgrohe Logis M32 71286000 wall-mounted kitchen faucet product specifications","type":"data_point"},{"url":"https://solutions.moen.com/Article_Library/Faucet_Hose-Retractable","title":"Moen Faucet Hose-Retractable, pull-out hose identification guide","type":"source"},{"url":"https://solutions.moen.com/Article_Library/How_to_Install_a_150259%252C_202750_or_212650_Hose","title":"Moen How to Install a 150259, 202750 or 212650 Hose","type":"source"},{"url":"https://solutions.moen.com/FAQ%27s/FAQ%27s-Kitchen_And_Bar/Maintenance/The_hose_for_my_pullout%2F%2Fpulldown_faucet_keeps_getting_caught_by_various_obstructions_in_the_cabinet_below.__What_can_be_done_to_alleviate_this_issue%3F","title":"Moen guidance on pull-out hoses and counterweights snagging on obstructions below","type":"source"},{"url":"https://www.brita.com/wp-content/uploads/024_BRT_BC_SAFF-100_UsersGuide.pdf","title":"Brita BASIC FAUCET MOUNT SYSTEM SAFF-100 instruction manual","type":"source"},{"url":"https://www.ikea.com/kr/ko/customer-service/services/installation/","title":"IKEA installation services and scope of work guide","type":"source"}],"images":[{"id":3040,"url":"https://onbinder.com/rails/active_storage/blobs/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDU5ODksInB1ciI6ImJsb2JfaWQifX0=--2e868b14f524b701912f61502b1cc117c292465d/ai-c0d3e874.webp","is_representative":true,"generation_method":"ai_photo","license":"ai_generated","mime_type":"image/webp","width":1536,"height":1024,"translations":{"ko":{"alt":"분리한 수전을 옆에 두고 캘리퍼스로 싱크대 상판의 설치 구멍을 재는 은발의 여성","caption":"상판형 수전을 교체하기 전에는 설치 구멍 치수가 새 수전의 고정 조건에 맞는지 확인해야 한다.","description":null},"en":{"alt":"A grey-haired woman measures a countertop mounting hole with calipers beside a removed kitchen faucet.","caption":"Before replacing a deck-mounted faucet, check that the mounting-hole dimensions meet the new faucet’s installation requirements.","description":null},"ja":{"alt":"取り外した水栓の横で、ノギスを使ってキッチン天板の取り付け穴を測る白髪の女性","caption":"台付き水栓の交換前には、取り付け穴の寸法が新しい水栓の固定条件に合うか確認する必要がある。","description":null},"es":{"alt":"Una mujer canosa mide con un calibre el orificio de la encimera junto a un grifo desmontado.","caption":"Antes de cambiar un grifo de encimera, hay que comprobar que las medidas del orificio cumplen sus requisitos de instalación.","description":null},"id":{"alt":"Perempuan berambut putih mengukur lubang meja dapur dengan jangka sorong di samping keran yang dilepas.","caption":"Sebelum mengganti keran yang dipasang pada meja, pastikan ukuran lubang sesuai dengan persyaratan pemasangan keran baru.","description":null},"pt":{"alt":"Uma mulher de cabelos grisalhos mede com um paquímetro o furo da bancada ao lado de uma torneira removida.","caption":"Antes de trocar uma torneira de bancada, verifique se as dimensões do furo atendem aos requisitos de instalação da nova torneira.","description":null},"zh-hant":{"alt":"一位銀髮女性用游標卡尺測量廚房檯面的安裝孔，旁邊放著拆下的水龍頭。","caption":"更換檯面式水龍頭前，須確認安裝孔尺寸符合新水龍頭的固定條件。","description":null},"de":{"alt":"Eine grauhaarige Frau misst mit einem Messschieber das Montageloch neben einer ausgebauten Küchenarmatur.","caption":"Vor dem Austausch einer Standarmatur muss geprüft werden, ob die Lochmaße den Montageanforderungen der neuen Armatur entsprechen.","description":null}}},{"id":3041,"url":"https://onbinder.com/rails/active_storage/blobs/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDU5OTUsInB1ciI6ImJsb2JfaWQifX0=--9be28ae1de41ea99343a5cfc49c7ca9256274c2e/ai-b5c0b435.webp","is_representative":false,"generation_method":"ai_semi","license":"ai_generated","mime_type":"image/webp","width":1536,"height":1024,"translations":{"ko":{"alt":"작업자가 열린 싱크대 하부장에서 손전등으로 급수 호스 연결부를 살펴보고 있다.","caption":"수전을 교체할 때는 새 본체의 급수 연결 규격이 기존 설비와 맞는지 확인해야 한다.","description":null},"en":{"alt":"An installer uses a flashlight to inspect supply-hose fittings inside an open cabinet beneath a sink.","caption":"A replacement faucet’s supply connections must be compatible with the existing plumbing.","description":null},"ja":{"alt":"作業員が開いたシンク下の収納内で、懐中電灯を使って給水ホースの接続部を確認している。","caption":"水栓を交換する際は、新しい本体の給水接続規格が既存の配管に合うか確認する必要がある。","description":null},"es":{"alt":"Un instalador revisa con una linterna las conexiones de las mangueras de suministro bajo el fregadero.","caption":"Las conexiones de suministro del nuevo grifo deben ser compatibles con la instalación existente.","description":null},"id":{"alt":"Teknisi memeriksa sambungan selang pasokan air dengan senter di dalam kabinet terbuka di bawah bak cuci.","caption":"Spesifikasi sambungan pasokan air keran pengganti harus sesuai dengan instalasi yang ada.","description":null},"pt":{"alt":"Um instalador usa uma lanterna para examinar as conexões das mangueiras de alimentação sob a pia.","caption":"As conexões de alimentação da nova torneira devem ser compatíveis com a instalação existente.","description":null},"zh-hant":{"alt":"安裝人員在敞開的水槽下方櫥櫃內，用手電筒檢查供水軟管接頭。","caption":"更換水龍頭時，須確認新本體的供水連接規格與既有管路相容。","description":null},"de":{"alt":"Ein Monteur prüft mit einer Taschenlampe die Zulaufschlauchanschlüsse im offenen Spülenunterschrank.","caption":"Die Wasseranschlüsse der neuen Armatur müssen zur vorhandenen Installation passen.","description":null}}}],"published_at":"2026-11-18T01:30:05+09:00","updated_at":"2026-11-18T01:30:05+09:00","license":"cc_by","translation_status":"reviewed","available_locales":["ko","en","ja","es"],"data_locales":["ko","en","ja","es","id","pt","zh-hant","de"],"url":"https://onbinder.com/en/articles/kitchen-faucet-mounting-and-replacement-compatibility"}