{"content_id":"xogodarngv","slug":"kitchen-faucet-hose-replacement-fit-check","locale":"en","schema_type":"HowTo","category":"how_to","category_name":"How-to","title":"Kitchen Faucet Hose Replacement: Check Both Ends for Fit","summary":"Before ordering a hose, find where water first beads up. Compare the faucet model and photos of both hose ends with the manufacturer's parts list to see whether the hose or seal can be replaced separately.","sponsorship_disclosure":null,"affiliate_disclosure":null,"commerce_disclosure":null,"author":{"name":"OnBinder Editorial Team","url":"https://onbinder.com/ko/about"},"key_points":["Wipe the connections dry and check which hose shows droplets first: the supply hose or the pull-out hose.","Record the faucet model name, the type of fitting at each end of the hose, the hose's total length, and the seal location.","Check the manufacturer's parts list or ask an authorized service center for the replacement part number and whether the part is available separately.","Shut off both the cold and hot water valves, confirm that the water stops flowing, and follow the manual to replace the hose.","Turn the water supply back on and check for leaks both with the faucet off and with the water running."],"content_markdown":"To replace a kitchen faucet hose, first find where water droplets start to form. Compare the faucet model name and photos of both ends of the hose with the manufacturer's parts list to identify the right part. Disconnect the hose only if you can shut off both the cold and hot water.\n\nThe length examples below are based on parts released in 2022 and listed in Moen's pull-out hose identification chart.\n\n## How to tell a supply hose from a pull-out hose\n\nLook under the sink and follow each hose to see what it does. The supply hoses carry cold and hot water separately to the faucet. The pull-out hose carries water from the faucet body to the pull-out spray head.\n\n| Hose type | One end | Other end |\n|---|---|---|\n| Cold or hot water supply hose | Cold or hot water valve under the sink | Supply connection on the faucet body |\n| Pull-out hose | Outlet connection beneath the faucet body | Pull-out spray head above the sink |\n\n## How to find where the leak starts\n\nTo narrow down what needs replacing, look for the first spot that gets wet after wiping everything dry, rather than where water has pooled. If water keeps pouring out, shut off the supply before looking for the leak. If you've been running hot water for a while, wait for the hose near the spray head to cool. The Daelim Trading FS6017C-RDW manual warns that touching this hose directly can cause burns.\n\n1. Use a dry cloth to wipe the valve, the hose itself, and the connections at both ends.\n2. With the faucet handle in the off position, check whether droplets form again on the valve or supply hose.\n3. If everything is still dry, run cold water briefly and check the connection between the spray head and the hose. Also check the pull-out hose connection under the sink.\n4. Take a photo of the spot where droplets first formed. When you contact the service center, also tell them whether the leak occurred only while the faucet was running.\n\n| First spot to get wet | What to check and what to do |\n|---|---|\n| A crack in the hose itself | Check the replacement part number for that hose and whether the hose is sold separately |\n| Between the spray head and hose or around the nut | Check the connection and gasket. If only the gasket is damaged and it's sold separately, replace it with the specified gasket |\n| Supply valve body or handle stem | Ask to have the valve inspected. If water keeps flowing, stop trying to disconnect the hose |\n| Faucet handle or body | Check whether water is running down from the faucet body, then ask the manufacturer to inspect the body |\n\n## Specifications to check before ordering a replacement\n\nRecord the faucet model name and how each end of the hose connects. Even if the nut on one end looks like a match, the other end may be held in place by a clip. You don't need to loosen the nut on the supply connection to take photos.\n\n| What to check | What to record |\n|---|---|\n| Manufacturer and model name | Full model name shown on the warranty, installation manual, or product box |\n| Both ends of the hose | Where each end connects, whether it uses threads or a clip, and the shape of any visible threads or retaining clips |\n| Hose length | Overall length and unit listed in the manual. This is not the length of hose exposed when you pull out the spray head |\n| Gasket | Whether and where a gasket seals the gap to prevent leaks. If it isn't visible from the outside, check the exploded diagram |\n| Part to order | Hose part number in the parts list for your model, whether the gasket is included, and whether it can be ordered separately |\n\n### When you know the model name but several hoses are listed\n\nIf several types of hose were used in the same faucet model, you'll need photos of both ends of the hose. In this case, Moen recommends comparing both ends of the existing hose with the illustrations in its identification chart. If you can't tell them apart, send the manufacturer's service center photos of the whole faucet and both ends of the hose.\n\n## Compatibility between hoses of the same length\n\nEven when hoses are the same length, the part number you need to order depends on the model. According to Moen's identification chart, 150259BL and 150259CST, both released in 2022, are each 68 inches long. The two parts even attach to the faucet body in the same way, but the manufacturer specifies different replacement part numbers.\n\n| Moen hose part number | Overall length | Replacement part number listed in the identification chart |\n|---|---|---|\n| 150259BL | 68 inches | 150259BL |\n| 150259CST | 68 inches | 150259CST |\n\nEven if the hose diameter or nut shape looks similar to what you have, check the part number for your model before ordering. If the part with the original number has been discontinued, it's more reliable to check the replacement number specified by the manufacturer. For Daelim Bath products, you can find the parts store under “Service/Inquiries” on the official website. If you need an inspection or repair, use “1:1 Inquiries” in the same menu.\n\n## How to remove the hose and check for leaks after replacement\n\nDisconnect the hose only after closing both the cold and hot water valves and making sure the water has stopped flowing. Moen's pull-out hose installation instructions also say to close the supply valves before starting. If the connections don't fit, stop rather than forcing them together.\n\n1. Close both the cold and hot water valves under the sink. Open the faucet and make sure the flow stops after the remaining water drains from both the cold and hot sides. If a valve won't turn or water keeps flowing, don't loosen the hose. Request a repair.\n2. Check the installation manual for your model to see how to disconnect the existing hose. If the pull-out hose has a weight, take a photo of its position before disconnecting the hose.\n3. Place the specified gasket where shown in the manual and connect the new hose. For threaded connections, follow the tightening instructions. For clip connections, make sure the retaining clip is fully engaged. The Daelim Trading FS6017C-RDW manual warns that applying force to the tip of the spray head can crack the threaded section and lead to scalding.\n\n\u003e Overtightening the nut may damage the gasket and cause a leak.\n\u003e\n\u003e Daelim Trading FS6017C-RDW Installation and Use Manual, Water Supply Hose Connection section\n\n4. If your model has a weight, reattach it at the position specified in the manual. Pull out the spray head and let it go to see whether the hose catches on the pipes.\n5. Turn off the faucet and slowly open the supply valves. First, use a dry tissue to check the valves and supply hose connections. Then run cold water and check the spray head and both ends of the pull-out hose. If droplets form again, shut off the supply and find where the water is leaking.","content_html":"\u003cp\u003eTo replace a kitchen faucet hose, first find where water droplets start to form. Compare the faucet model name and photos of both ends of the hose with the manufacturer's parts list to identify the right part. Disconnect the hose only if you can shut off both the cold and hot water.\u003c/p\u003e\n\u003cp\u003eThe length examples below are based on parts released in 2022 and listed in Moen's pull-out hose identification chart.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#how-to-tell-a-supply-hose-from-a-pull-out-hose\" class=\"anchor\" id=\"how-to-tell-a-supply-hose-from-a-pull-out-hose\"\u003e\u003c/a\u003eHow to tell a supply hose from a pull-out hose\u003c/h2\u003e\n\u003cp\u003eLook under the sink and follow each hose to see what it does. The supply hoses carry cold and hot water separately to the faucet. The pull-out hose carries water from the faucet body to the pull-out spray head.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eHose type\u003c/th\u003e\n\u003cth\u003eOne end\u003c/th\u003e\n\u003cth\u003eOther end\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Hose type\"\u003eCold or hot water supply hose\u003c/td\u003e\n\u003ctd data-label=\"One end\"\u003eCold or hot water valve under the sink\u003c/td\u003e\n\u003ctd data-label=\"Other end\"\u003eSupply connection on the faucet body\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Hose type\"\u003ePull-out hose\u003c/td\u003e\n\u003ctd data-label=\"One end\"\u003eOutlet connection beneath the faucet body\u003c/td\u003e\n\u003ctd data-label=\"Other end\"\u003ePull-out spray head above the sink\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003ch2\u003e\n\u003ca href=\"#how-to-find-where-the-leak-starts\" class=\"anchor\" id=\"how-to-find-where-the-leak-starts\"\u003e\u003c/a\u003eHow to find where the leak starts\u003c/h2\u003e\n\u003cp\u003eTo narrow down what needs replacing, look for the first spot that gets wet after wiping everything dry, rather than where water has pooled. If water keeps pouring out, shut off the supply before looking for the leak. If you've been running hot water for a while, wait for the hose near the spray head to cool. The Daelim Trading FS6017C-RDW manual warns that touching this hose directly can cause burns.\u003c/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a dry cloth to wipe the valve, the hose itself, and the connections at both ends.\u003c/li\u003e\n\u003cli\u003eWith the faucet handle in the off position, check whether droplets form again on the valve or supply hose.\u003c/li\u003e\n\u003cli\u003eIf everything is still dry, run cold water briefly and check the connection between the spray head and the hose. Also check the pull-out hose connection under the sink.\u003c/li\u003e\n\u003cli\u003eTake a photo of the spot where droplets first formed. When you contact the service center, also tell them whether the leak occurred only while the faucet was running.\u003c/li\u003e\n\u003c/ol\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFirst spot to get wet\u003c/th\u003e\n\u003cth\u003eWhat to check and what to do\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"First spot to get wet\"\u003eA crack in the hose itself\u003c/td\u003e\n\u003ctd data-label=\"What to check and what to do\"\u003eCheck the replacement part number for that hose and whether the hose is sold separately\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"First spot to get wet\"\u003eBetween the spray head and hose or around the nut\u003c/td\u003e\n\u003ctd data-label=\"What to check and what to do\"\u003eCheck the connection and gasket. If only the gasket is damaged and it's sold separately, replace it with the specified gasket\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"First spot to get wet\"\u003eSupply valve body or handle stem\u003c/td\u003e\n\u003ctd data-label=\"What to check and what to do\"\u003eAsk to have the valve inspected. If water keeps flowing, stop trying to disconnect the hose\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"First spot to get wet\"\u003eFaucet handle or body\u003c/td\u003e\n\u003ctd data-label=\"What to check and what to do\"\u003eCheck whether water is running down from the faucet body, then ask the manufacturer to inspect the body\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003ch2\u003e\n\u003ca href=\"#specifications-to-check-before-ordering-a-replacement\" class=\"anchor\" id=\"specifications-to-check-before-ordering-a-replacement\"\u003e\u003c/a\u003eSpecifications to check before ordering a replacement\u003c/h2\u003e\n\u003cp\u003eRecord the faucet model name and how each end of the hose connects. Even if the nut on one end looks like a match, the other end may be held in place by a clip. You don't need to loosen the nut on the supply connection to take photos.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat to check\u003c/th\u003e\n\u003cth\u003eWhat to record\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"What to check\"\u003eManufacturer and model name\u003c/td\u003e\n\u003ctd data-label=\"What to record\"\u003eFull model name shown on the warranty, installation manual, or product box\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"What to check\"\u003eBoth ends of the hose\u003c/td\u003e\n\u003ctd data-label=\"What to record\"\u003eWhere each end connects, whether it uses threads or a clip, and the shape of any visible threads or retaining clips\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"What to check\"\u003eHose length\u003c/td\u003e\n\u003ctd data-label=\"What to record\"\u003eOverall length and unit listed in the manual. This is not the length of hose exposed when you pull out the spray head\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"What to check\"\u003eGasket\u003c/td\u003e\n\u003ctd data-label=\"What to record\"\u003eWhether and where a gasket seals the gap to prevent leaks. If it isn't visible from the outside, check the exploded diagram\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"What to check\"\u003ePart to order\u003c/td\u003e\n\u003ctd data-label=\"What to record\"\u003eHose part number in the parts list for your model, whether the gasket is included, and whether it can be ordered separately\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003ch3\u003e\n\u003ca href=\"#when-you-know-the-model-name-but-several-hoses-are-listed\" class=\"anchor\" id=\"when-you-know-the-model-name-but-several-hoses-are-listed\"\u003e\u003c/a\u003eWhen you know the model name but several hoses are listed\u003c/h3\u003e\n\u003cp\u003eIf several types of hose were used in the same faucet model, you'll need photos of both ends of the hose. In this case, Moen recommends comparing both ends of the existing hose with the illustrations in its identification chart. If you can't tell them apart, send the manufacturer's service center photos of the whole faucet and both ends of the hose.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#compatibility-between-hoses-of-the-same-length\" class=\"anchor\" id=\"compatibility-between-hoses-of-the-same-length\"\u003e\u003c/a\u003eCompatibility between hoses of the same length\u003c/h2\u003e\n\u003cp\u003eEven when hoses are the same length, the part number you need to order depends on the model. According to Moen's identification chart, 150259BL and 150259CST, both released in 2022, are each 68 inches long. The two parts even attach to the faucet body in the same way, but the manufacturer specifies different replacement part numbers.\u003c/p\u003e\n\u003cdiv class=\"overflow-x-auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMoen hose part number\u003c/th\u003e\n\u003cth\u003eOverall length\u003c/th\u003e\n\u003cth\u003eReplacement part number listed in the identification chart\u003c/th\u003e\n\u003c/tr\u003e\n\u003c/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Moen hose part number\"\u003e150259BL\u003c/td\u003e\n\u003ctd data-label=\"Overall length\"\u003e68 inches\u003c/td\u003e\n\u003ctd data-label=\"Replacement part number listed in the identification chart\"\u003e150259BL\u003c/td\u003e\n\u003c/tr\u003e\n\u003ctr\u003e\n\u003ctd data-label=\"Moen hose part number\"\u003e150259CST\u003c/td\u003e\n\u003ctd data-label=\"Overall length\"\u003e68 inches\u003c/td\u003e\n\u003ctd data-label=\"Replacement part number listed in the identification chart\"\u003e150259CST\u003c/td\u003e\n\u003c/tr\u003e\n\u003c/tbody\u003e\n\u003c/table\u003e\u003c/div\u003e\n\u003cp\u003eEven if the hose diameter or nut shape looks similar to what you have, check the part number for your model before ordering. If the part with the original number has been discontinued, it's more reliable to check the replacement number specified by the manufacturer. For Daelim Bath products, you can find the parts store under “Service/Inquiries” on the official website. If you need an inspection or repair, use “1:1 Inquiries” in the same menu.\u003c/p\u003e\n\u003ch2\u003e\n\u003ca href=\"#how-to-remove-the-hose-and-check-for-leaks-after-replacement\" class=\"anchor\" id=\"how-to-remove-the-hose-and-check-for-leaks-after-replacement\"\u003e\u003c/a\u003eHow to remove the hose and check for leaks after replacement\u003c/h2\u003e\n\u003cp\u003eDisconnect the hose only after closing both the cold and hot water valves and making sure the water has stopped flowing. Moen's pull-out hose installation instructions also say to close the supply valves before starting. If the connections don't fit, stop rather than forcing them together.\u003c/p\u003e\n\u003col\u003e\n\u003cli\u003eClose both the cold and hot water valves under the sink. Open the faucet and make sure the flow stops after the remaining water drains from both the cold and hot sides. If a valve won't turn or water keeps flowing, don't loosen the hose. Request a repair.\u003c/li\u003e\n\u003cli\u003eCheck the installation manual for your model to see how to disconnect the existing hose. If the pull-out hose has a weight, take a photo of its position before disconnecting the hose.\u003c/li\u003e\n\u003cli\u003ePlace the specified gasket where shown in the manual and connect the new hose. For threaded connections, follow the tightening instructions. For clip connections, make sure the retaining clip is fully engaged. The Daelim Trading FS6017C-RDW manual warns that applying force to the tip of the spray head can crack the threaded section and lead to scalding.\u003c/li\u003e\n\u003c/ol\u003e\n\u003cblockquote\u003e\n\u003cp\u003eOvertightening the nut may damage the gasket and cause a leak.\u003c/p\u003e\n\u003cp\u003eDaelim Trading FS6017C-RDW Installation and Use Manual, Water Supply Hose Connection section\u003c/p\u003e\n\u003c/blockquote\u003e\n\u003col start=\"4\"\u003e\n\u003cli\u003eIf your model has a weight, reattach it at the position specified in the manual. Pull out the spray head and let it go to see whether the hose catches on the pipes.\u003c/li\u003e\n\u003cli\u003eTurn off the faucet and slowly open the supply valves. First, use a dry tissue to check the valves and supply hose connections. Then run cold water and check the spray head and both ends of the pull-out hose. If droplets form again, shut off the supply and find where the water is leaking.\u003c/li\u003e\n\u003c/ol\u003e\n","tags":["Water leaks","Kitchenware","Household essentials"],"faqs":[{"question":"Is the hose compatible if the diameter and nut shape match?","answer":"It's hard to tell whether a hose is compatible from its diameter and nut shape alone. Check how each end of the hose is secured, then check the hose against the replacement part number specified for your faucet model."},{"question":"Can I order a hose based on the length I measure with the spray head pulled out all the way?","answer":"The section you see when you pull out the spray head is only part of the hose's total length. Check both the total length and the part number in the parts list for your model."},{"question":"What photos should I send the manufacturer if I don't know the model name?","answer":"Take photos showing the entire faucet and where each end of the hose connects. If the product or model name is still listed on the warranty certificate or in the installation instructions, send that information too."},{"question":"When can I replace just the gasket?","answer":"If a damaged gasket is causing the leak and the right gasket for your model is available separately, you can replace just the gasket. If the hose itself is cracked, check for a replacement hose."},{"question":"What should I check first if it gets wet under the sink even though the faucet is off?","answer":"Check the cold and hot water valves and the supply hoses first. Even when you turn off the faucet at the handle, water is still supplied from the valves to the faucet. Wipe the area dry and see where it gets wet first to narrow down whether to check a valve or a hose."},{"question":"Can I disconnect the hose if water keeps flowing after I shut off the valve?","answer":"Stop working and leave the hose connected. If water keeps flowing after the remaining water has drained, the water supply hasn't been shut off. Don't force the valve. Ask to have it inspected."},{"question":"Should I run the water after connecting the new hose?","answer":"First, open the water supply valve and check around the valve and supply hose with the faucet off. Then turn on the cold water so you can also check the pull-out hose connection for leaks that occur only when water flows to the spray head."}],"sources":[{"url":"https://daelimtrading.co.kr/sea/store/FS6017C-RDW%20%EC%84%A4%EC%B9%98%20%EC%82%AC%EC%9A%A9%EC%84%A4%EB%AA%85%EC%84%9C.pdf","title":"Daelim Trading FS6017C-RDW Installation and User Manual","type":"source"},{"url":"https://solutions.moen.com/Article_Library/Faucet_Hose-Retractable","title":"Moen Retractable Hose Identification Chart, Faucet Hose-Retractable","type":"data_point"},{"url":"https://solutions.moen.com/Article_Library/Kitchen_Faucet%3A_Leaking_Under_The_Sink_Base","title":"Guide to Checking for Leaks Under Moen Kitchen Faucets","type":"source"},{"url":"https://solutions.moen.com/Article_Library/How_to_Install_a_150259,_202750_or_212650_Hose","title":"Moen 150259, 202750, and 212650 Retractable Hose Installation Guide","type":"source"},{"url":"https://www.daelimbath.com/partsmall","title":"Guide to Daelim Bath's Official Parts Store and Repair Inquiries","type":"source"}],"images":[{"id":3251,"url":"https://onbinder.com/rails/active_storage/blobs/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDg5NTIsInB1ciI6ImJsb2JfaWQifX0=--6e34b98d7ddf756f776970b6f5e1584e1bad825a/ai-1c1276f8.webp","is_representative":true,"generation_method":"ai_photo","license":"ai_generated","mime_type":"image/webp","width":1536,"height":1024,"translations":{"ko":{"alt":"싱크대 옆에서 탈거한 수전 호스의 나사식 끝과 클립식 끝을 도면과 비교하는 남성","caption":"주문 전에 호스 양끝의 연결 규격을 제조사 부품표와 대조해 호환 여부를 확인하세요.","description":null},"en":{"alt":"A man compares the threaded and clip-on ends of a removed faucet hose with a diagram beside the sink.","caption":"Before ordering, check both end fittings against the manufacturer’s parts list to confirm compatibility.","description":null},"ja":{"alt":"シンク脇で、取り外した水栓ホースのねじ式とクリップ式の接続部を図と見比べる男性","caption":"注文前にホース両端の接続規格をメーカーの部品表と照合し、適合するか確認しましょう。","description":null},"es":{"alt":"Junto al fregadero, un hombre compara los extremos roscado y con clip de la manguera retirada del grifo con un esquema.","caption":"Antes de hacer el pedido, coteja las conexiones de ambos extremos con el catálogo del fabricante para confirmar la compatibilidad.","description":null},"id":{"alt":"Di sisi bak cuci, seorang pria mencocokkan ujung berulir dan ujung berklip pada selang keran yang dilepas dengan diagram.","caption":"Sebelum memesan, cocokkan spesifikasi sambungan di kedua ujung selang dengan daftar suku cadang pabrikan untuk memastikan kompatibilitas.","description":null},"pt":{"alt":"Junto à pia, um homem compara as pontas com rosca e com presilha da mangueira retirada da torneira com um esquema.","caption":"Antes de encomendar, confira as conexões das duas pontas no catálogo de peças do fabricante para confirmar a compatibilidade.","description":null},"zh-hant":{"alt":"一名男子在水槽旁對照圖示，查看拆下的水龍頭軟管兩端的螺紋接頭與卡扣接頭。","caption":"訂購前，請依照原廠零件表核對軟管兩端的接頭規格，確認是否相容。","description":null},"de":{"alt":"Am Spülbecken vergleicht ein Mann Gewinde- und Clipanschluss des ausgebauten Armaturenschlauchs mit einer Zeichnung.","caption":"Gleichen Sie vor der Bestellung beide Schlauchanschlüsse mit der Teileliste des Herstellers ab, um die Kompatibilität zu prüfen.","description":null}}},{"id":3252,"url":"https://onbinder.com/rails/active_storage/blobs/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDg5NTksInB1ciI6ImJsb2JfaWQifX0=--a1c91068f0cc8d0e3799c622b512f21a03363719/ai-0f382492.webp","is_representative":false,"generation_method":"ai_semi","license":"ai_generated","mime_type":"image/webp","width":1536,"height":1024,"translations":{"ko":{"alt":"파란 스웨터를 입은 여성이 싱크대 아래 급수 호스와 밸브의 연결부에 흰 휴지를 가까이 댄다.","caption":"호스 교체 후 급수를 다시 열고, 수전을 잠갔을 때와 틀었을 때 각각 누수가 없는지 확인하세요.","description":null},"en":{"alt":"A woman in a blue sweater holds a white tissue near the supply hose connection at the shutoff valve under the sink.","caption":"After replacing the hose, restore the water supply and check for leaks with the faucet both off and running.","description":null},"ja":{"alt":"青いセーターの女性が、シンク下の給水ホースと止水栓のつなぎ目に白いティッシュを近づけている。","caption":"ホース交換後は給水を再開し、蛇口を閉めた状態と水を流した状態の両方で水漏れがないか確認しましょう。","description":null},"es":{"alt":"Una mujer con suéter azul acerca un pañuelo de papel a la unión de la manguera con la llave de paso bajo el fregadero.","caption":"Tras cambiar la manguera, restablece el suministro y comprueba si hay fugas con el grifo cerrado y con el agua corriendo.","description":null},"id":{"alt":"Perempuan bersweter biru mendekatkan tisu putih ke sambungan selang suplai dan katup penutup di bawah bak cuci.","caption":"Setelah mengganti selang, buka kembali suplai air dan periksa kebocoran saat keran tertutup maupun saat air mengalir.","description":null},"pt":{"alt":"Uma mulher de suéter azul aproxima um lenço de papel da união da mangueira com o registro sob a pia.","caption":"Após trocar a mangueira, restabeleça o abastecimento e verifique se há vazamentos com a torneira fechada e com a água correndo.","description":null},"zh-hant":{"alt":"穿藍色毛衣的女子在水槽下方，將白色紙巾靠近供水軟管與止水閥的接頭。","caption":"更換軟管後恢復供水，並在水龍頭關閉和開啟出水時分別檢查是否漏水。","description":null},"de":{"alt":"Eine Frau im blauen Pullover hält ein weißes Tuch an den Übergang vom Zulaufschlauch zum Eckventil unter der Spüle.","caption":"Drehen Sie nach dem Schlauchwechsel die Wasserzufuhr wieder auf und prüfen Sie bei geschlossenem Hahn und bei laufendem Wasser auf Lecks.","description":null}}}],"published_at":"2026-11-21T19:26:01+09:00","updated_at":"2026-11-21T19:26:01+09:00","license":"cc_by","translation_status":"reviewed","available_locales":["ko","en","ja","es"],"data_locales":["ko","en","ja","es","id","pt","zh-hant","de"],"url":"https://onbinder.com/en/articles/kitchen-faucet-hose-replacement-fit-check"}